
Distribution of flow in branches 28 kB (07Feb2001)
For estimating the distribution of flow in branches of pipelines as shown in the diagram:

Pipe friction and losses through fittings 164 kB (14Feb2001)
A 35^{o} API distillate is being transferred from a storage tank at 1 atm absolute pressure to a pressure vessel at 50 psig by means of the piping arrangements shown in figure.
The liquid flows at the rate of 23100 lb/hr through 3 inch Schedule 40 steel pipe; the length of the straight pipe is 450 feet. Calculate the minimum horsepower input to the pump having an efficiency of 60 percent.
The properties of the distillate are: viscosity = 3.4 cP, density = 52 lb/ft^{3}.
The following are the data for the pipe and fittings:
For 3 inch Schedule 40 Nominal pipe, OD = 3.5 inch; Thickness = 0.216 inch
Flow coefficients for the fittings (K) are:
Gate valve = 0.25; 90^{o} elbow = 0.9; Check valve = 10
Friction factor can be calculated from Blasius equation. Account for entry and exit losses also.

Solution to the pumping problem  20 kB
msubbu.in@gmail.com  7338856161